CNME Intermational Co.Ltd -

CNME Intermational Co.Ltd

Showing 1 - 10 of 18, total 2 pages [First] [Previous] [Next] [Last]

porcelain insulator
Specification: Electrical Engineering Equipment
Detail: Porcelain insulators manufactured are wet process porcelain, and used in distribution and transmission line. Porcelain line post insulator Main parameters Voltage Range: 1kV~220kV Cantilever strength:4kN,8kN,12.5kN and as ...

oil immersed current transformer
Specification: Electrical Engineering Equipment
Detail: main parameter of 69kv CT Rated current ratio: 2000/1600/1500/1200/1100/800/500/400/300 : 5 A Rated output capacity of each corresponding ratio: 200/160/150/120/110/80/45/35/25 VA Winding accuracy class: 0.2/5P20/5P20/5P20...

shuttle kiln for ceramic products
Specification: Electrical Engineering Equipment
Detail: Brief introduction of shuttle kiln: shuttle kiln and tunnel kiln are important sintering equipment in ceramic and procelain insulator industries. We have the know-how for design high temperature high-speed burner equipped sh...

faraday cage of hv transformer pd test
Specification: Electrical Engineering Equipment
Detail: Application: HV test shielding room (faraday cage) are Widely used in power cable, transformer, transformer switch, transformer substation and other High voltage levels of partial discharge test or impulse test. Technical...

shielding hall of hv pd test
Specification: Electrical Engineering Equipment
Detail: Application: HV test shielding room (faraday cage) are Widely used in power cable, transformer, transformer switch, transformer substation and other High voltage levels of partial discharge test or impulse test. For HV test...

mobile substation
Specification: Electrical Engineering Equipment
Detail: Performance characteristics ¢Ù Rapid allocation: connections between equipments are connected .After connected to earth system and outgoing and ingoing lines connected well on site, it can operate then. ¢Ú Good maneuverabili...

500kv mobile lab for ct/vt measurement test
Specification: Electrical Engineering Equipment
Detail: 500kV CT&PT mobile lab is made up of a truck for 220kV CT&PT error test, a 500kV van-type trailer, test equipment and instruments(including standard PT and step-up transformer integrated equipment, strong current generator, st...

single phase 6 position test system for energy meter calibration
Specification: Electrical Engineering Equipment
Detail: 1. Introduction single phase energy auto-calibration system is a new generation, high precision energy meter calibration equipment. It uses the advanced technology and electronic components available in 90 decade.The test be...

energy meter calibration -- cnkp-s3000 three phase 5 position 0
Specification: Electrical Engineering Equipment
Detail: 1. Introduction KP-S3000 three phase energy meter test bench is a new generation, high precision energy meter calibration equipment. It uses the advanced technology and electronic components available in 90 decade . The test ...

ct & vt accuracy measurement testing system----general type
Specification: Electrical Engineering Equipment
Detail: 1.Measure item: Ratio Error and Phase Error of the CT& PT 2.Complying with ANSI / IEEE C57.13 Standard or IEC 60044-1 Standard (According to the User`s requirements) 3.Testing system included: &©|8226; HES Series Control...


Showing 1 - 10 of 18, total 2 pages [First] [Previous] [Next] [Last]
1 2